The circular sawing machine is an energy-efficient stone equipment, which is favored by customers. In the use of machinery, problems are inevitable. So what is the reason for the bending of the plate during the work of the circular sawing machine? We analyze and explain for you.China stone pofiling machine manufacturers
Most small stone processing factories do not have a clear sawing process at all; regular stone processing plants only develop a simple sawing process based on the hardness of the stone, but the implementation is not strict. Therefore, we believe that the stone processing factory should fully examine the accuracy of the selected giant machine, the quality of the cutter head, the accuracy of the substrate and the degree of rewelding when formulating the giant cutting process, and consider the difficulty of cutting the stone to make a reasonable The sawing process is strictly implemented. Make up for the lack of sawing machine and saw blade through reasonable adjustment of the process. The experience of some stone factories is worth learning: when the plate is bent, the amount of cutting is appropriately reduced, and the horizontal cutting speed is increased; when there is left and right bending, the amount of cutting is appropriately increased to reduce the horizontal cutting speed, and the effect is obvious. Therefore, in daily production management, a mature cutting process must be strictly implemented. When the bending phenomenon occurs, the cutting process and the implementation should be investigated and analyzed in depth, and rectification opinions and preventive measures should be put forward, which can get twice the result with half the effort.