China Stone CNC Machines Manufacturers is a widely used equipment in the industry and is favored by customers. The saw blade is an important part of the machine, and it has a huge impact on the production effect. So for stone machinery, what are the requirements for the saw blade head? We analyze and explain for you.
The width of the cutter head should be grouped according to its size error, and the width error of the cutter head on the same saw blade should be controlled within 0.05mm. The cutter head should be welded to the chip symmetrically, and the error of the side of each cutter head relative to the side of the chip body after welding is not more than 0.08mm.PLC AUTOMATIC PROFILING CUTTER ZDFX
The sharpness of the cutter head directly affects the cutting efficiency and service life. When using, you should choose the appropriate amount of cutting and sawing speed according to the different materials of the block. The sawing current should be controlled within 80% to 90% of the rated value, and the sawing sound should be smooth and smooth. Sometimes after a sharp cutter head is used for a period of time, it is difficult to saw down, the current increases, and the sound becomes thicker. This is because the emery wears off or the mixing is uneven during the manufacture of the cutter head, so that the emery content of this layer is insufficient. Effective sawing. At this time, the sawing performance can be restored after the emery is exposed.