The stone edging machine is mainly suitable for the grinding and shaping of straight lines, arcs, edging, waistlines, foot lines, and other plates of granite, marble, quartz stone, and other plates. A stone edging machine is a kind of edging machine for processing and polishing the straight edge lines of various granite, marble, and quartz stone.
1. Check the equipment before starting work, it must be in normal condition.
2. Operators must wear gloves and masks or dust-proof equipment. The doors and windows of the work area should be closed to avoid the escape of silica dust. Ventilation and dust removal devices must be in good working order.
3. Precautions for inspection before work:
(1) The grinding wheel pressing nut shall not be loose;
(2) The grinding wheel must not have cracks and notches;
(3) The safety cover is fully assembled and reliable;
(4) The front and rear, up and down transmission handles are flexible to operate, and there is no noise during operation.
4. When edging the steel plate, the adjustment size of the grinding wheel should be strictly controlled, and the grinding amount should not be too large at one time, so as to avoid the wear of the steel plate and the rupture of the grinding wheel.
5. If there is a failure when grinding the plate, such as the steel plate being stuck, the main switch should be turned off immediately, and the steel plate should be taken out after parking.
6. During production, always pay attention to check whether the motor has heat and abnormal operation.
7. Stacked steel plates (especially cold-rolled plates and oil plates) should be neat, not skewed, not higher than 1.2 meters, and collide with each other, so as to avoid slipping and hurting people.
8. The feeding and transporting steel plates should be held stably and straightly, and should not be thrown away, so as not to hurt people.
9. When the ventilation and dust removal device fails, stop work or take measures.
10. When the work is finished, close the switch and do the cleaning work.