News

There are several ways to install the general stone cutting machine

Update:17-08-2022 9:41:41
Summary:

There are several ways to install the general stone cut […]

There are several ways to install the general stone cutting machine.
First, we need to place the equipment horizontally, and if there is a track, place the track on the ground. Make the width of the cutting machine equal to the width of the guide wheels and equal. It is convenient for the cutting machine to walk and work.
Second, after the stone cutting machine is level and stable, it is necessary to lay a cement foundation. The cutting machine with a track should be placed on the track, and the forward and backward movement is completely consistent with the track and can move freely.
Third, the stone cutting machine can work after it is stable. The cutting with a rack should be placed on the track, and the main wheel of the stone cutter should be completely in line with the channel steel on the rack. After the host is placed, test the machine.
Fourth, it should be noted that after the equipment is installed regardless of its size, the motor of the cutting machine should be firmly installed, and the motor frame should be firmly connected to the host. And the axis of the motor crosses the direction of the host horizontally and vertically.
Fifth, the last is some cleaning work, install the belt, install the guard, and check that the rotation direction of the saw blade shaft is consistent with the direction indicated by the guard arrow. Install saw blades, connect water pipes, etc.
Wood cutting machines are widely used because of their high processing efficiency, low production cost, and easy use. In order to play these functions normally, it is necessary to ensure the correct installation method. Therefore, mastering the installation method of the stone cutting machine is the premise of normal operation.

 

BRIDGE CUTTING MACHINE(PROCESSING LINE) ZD-TM450

BRIDGE CUTTING MACHINE(PROCESSING LINE) ZD-TM450

 

Item ZD-TM450
Processing mode Processing line
Processing size 3200×2000×30mm
Diameter of Blade Φ350-Φ400mm
Total power 19kw
Outline dimension 6000×3800×2500mm
Main engine power 11kw
Water consumption 3m³/h

 

0
Views: 39