News

What are the precautions for using high-speed polishing machine?

Update:24-11-2021 18:21:35
Summary:

1. It is not allowed to use high-speed polishing machin […]

1. It is not allowed to use high-speed polishing machine if the following situations are found
The operator has not received professional training.
The operator has not learned the "safe operating procedures".
The high-speed polishing machine is not working properly.
2. Before using the high-speed polishing machine, check the environment as follows
Keep the hands and feet of the operator away from the rotating polishing head.
The operator shall not step on the power cord or entangle the power cord in the polishing head.
The operator must dress safely.
The polished area must not exceed the length of the power cord.
The operator is not allowed to take off the operating handle without authorization. When the machine is stopped, the handle can only be released after the high-speed polishing machine completely stops rotating.
Do not use polishing pads with dust and dirt. When the polishing pad with too much dirt cannot be cleaned, replace it in time.
When replacing or installing the polishing pad, the power supply must be cut off.
3. Storage of high-speed polishing machine
Cut off the power.
Tilt back and store the rear wheel on the ground.
Do not store outdoors, and should be stored in a dry place.

Zhejiang Haigong Machinery Co., Ltd. is famous China Stone Edge Polishing Machines Manufacturers and Stone polishing machines factory, set up in 1978 and it is located in TAIZHOU, a coast city in the Yangtze delta with an advanced economy and convenient transportation. We are always a global leader in stone processing machinery as our lifelong goal. We have been devoted to developing and producing various stone machinery for more than 30 years of history. 

0
Views: 300