Stone machineryChina Stone CNC Machines Manufacturers is a widely used equipment in the industry and is favored by customers. Lubrication is a very important matter, which has a great impact on all aspects of machinery. Today we will tell you the importance of lubrication in maintenance.
Whether the equipment maintenance method and lubrication method are correct is extremely important to the wear condition of the friction pair. Whether the maintenance process is clean or the test cloth is clean will affect the wear process. During maintenance, the replacement of accessories and lubricants should be done carefully. Wiping cloths must be cleaned when replacing accessories. Wiping cloths on important parts should be cleaned before use to prevent dust from contaminating the accessories. The lubricated parts of newly replaced accessories should be cleaned. Clean thoroughly, and the installation part should also be cleaned thoroughly. For the newly replaced gears of the gearbox, it should be cleaned up after running-in and replaced with lubricating oil before putting it into normal operation. When replacing the bearing, if it is a sealed bearing, the bearing has been added with grease, no need to add grease. When installing, protect the sealing cover from damage to avoid grease overflow and dust intrusion; and hot-loading is not allowed during installation to prevent lubrication The fat melted and overflowed. At the same time, pay attention to cleaning when replacing the bearing. Dust, impurities or moisture in the lubricating grease will cause greater wear on the bearing. When the content of impurities increases to 0.5%, the wear can increase by 5 to 10 times. The amount of grease added should be appropriate, generally 1/2 to 1/3 of the bearing cavity.